gefran VDI100 Series

Code Parameter Name / Range
10-35 PID Unit
0~
23
PID unit is selected depending on user’s needs.
Note: When user switches PID in LED keypad, 10-33 is required to be lower than 1000 and 10-34=1, or the keypad will
show a SE05 alarm (PID setting error).
Code Parameter Name / Range
10-39 Output Frequency Setting of PID Disconnection
00.00~599.00 Hz
When PID feedback disconnection is in alarm, frequency command output depends on the setting value of 10-
39. If the warning is lifted, PID control is restored.
VDI100 • Instruction manual 223