Gehl R190 User Manual

116 50950106/AP0313
Common Materials and Densities
Note: The densities listed are average values and intended only as a guide for
bucket selection. For a material that is not in the table, obtain its density value
before selecting the appropriate bucket.
Material
Density
lbs./cu. ft.
kg/m
3
Ashes 35-50 560-800
Brick-common 112 1792
Cement 110 1760
Charcoal 23 368
Clay, wet-dry 80-100 1280-1600
Coal 53-63 848-1008
Concrete 115 1840
Cinders 50 800
Coal-anthracite 94 1504
Coke 30 480
Earth-dry loam 70-90 1121-1442
Earth-wet loam 80-100 1281-1602
Granite 93-111 1488-1776
Gravel-dry 100 1602
Gravel-wet 120 1922
Gypsum-crushed 115 1840
Iron ore 145 2320
Lime 60 960
Lime stone 90 1440
Manure-liquid 65 1040
Manure-solid 45 720
Peat-solid 47 752
Phosphate-granular 90 1440
Potash 68 1088
Quartz-granular 110 1760
Salt-dry 100 1602
Salt-rock-solid 135 2160
Sand-dry 108 1728
Sand-wet 125 2000
Sand-foundry 95 1520
Shale-crushed 90 1440
Slag-crushed 70 1120
Snow 15-50 240-800
Taconite 107 1712

Gehl R190 Specifications

General

Rated Operating Capacity	1, 900 lbs
Tipping Load	3, 800 lbs
Engine Make	Yanmar
Travel Speed	7.5 mph
Auxiliary Hydraulic Flow	18.5 gpm
Hydraulic System Flow	18.5 gpm