24 50950106/AP0313
Work Lights
Loaders have two sets of work lights. The front work lights are located at the top
of the ROPS/FOPS. The rear work lights are located at the top of the rear grille.
Heater (optional)
Loaders with the optional heater have two control knobs on the left instrument
panel for controlling fan speed and heater temperature (see Figure 5).
1. Fan Speed Control: Controls the air flow.
2. Temperature Control: The potentiometer switch is a rotary dial for control
of heat functions.
Heater and Air Conditioner (optional)
Loaders with the combination heater/air
conditioner have two control knobs on the
left instrument panel for controlling fan
speed and heater/air conditioner tempera-
ture.
1. Fan Speed Control: Controls the air
flow.
2. Temperature Control: The potenti-
ometer switch is a rotary dial for con-
trol of heat and air conditioning
functions.
Figure 5 Heater/
Air Conditioner Controls
2
1
To Next Page
Loading...
