Gehl R190 User Manual

50950106/AP0313 17
Product and Component Plate Locations
Product and Component Plates
1. Operator protective system plate: with, e.g., model, certification and operator
protective system serial number
2. Seat plate according to ISO 7096
3. Product plate: with Product Identification Number and, e.g., model/type designation
4. Engine plate: with, e.g., type designation, product and serial numbers
5. Component plate hydrostatic pump: with, e.g., product and serial numbers
6. Component plate drive motor: with, e.g., product and serial numbers
1
4
6
2
3
5

Gehl R190 Specifications

General

Rated Operating Capacity	1, 900 lbs
Tipping Load	3, 800 lbs
Engine Make	Yanmar
Travel Speed	7.5 mph
Auxiliary Hydraulic Flow	18.5 gpm
Hydraulic System Flow	18.5 gpm