EasyManuals Logo

Gehl R190 User Manual

Gehl R190
130 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #17 background imageLoading...
Page #17 background image
50950106/AP0313 13
ISO-Style (used Internationally)
Safety Decals inside the ROPS/FOPS
242590
G
A
B
C
D
E
F
A – Forward tip hazard: Fasten seat belt. Carry load low. Do
not exceed Rated Operating Load.
B – Side tip hazard: Avoid steep slopes and high speed turns.
Travel up and down slopes with heavy end uphill.
C – Crush hazard: Keep out from under lift arm unless lift arm
is supported.
D – Crush hazard: Keep hands, feet and body inside cab when
operating.
Safety alert: Read Operator’s
Manual and all safety signs
before using machine. The
owner is responsible to ensure
all users are instructed on safe
use and maintenance.
242568 – Located behind
operator’s left shoulder
242246 – Located on right instrument panel
Safety alert: Always follow
“Mandatory Safety Shutdown
Procedure” in Operator’s
Manual.
1 – Lower equipment to ground.
2 – Reduce throttle, stop engine.
3 – Apply parking brake; remove
key.
4 – Check safety interlocks.
242590 –
Located on left
instrument
panel
Safety alert:
A – Check machine before
operating; Service per
Operator’s Manual. Contact
dealer (or manufacturer) for
information and service parts.
B – Maintain 3-point contact during
entry and exit.
C – Inspect work area. Avoid all
hazards. Look in direction of
travel. Keep children and
bystanders away.
D – Start and operate machine only
from seat.
E – Keep away from power lines;
avoid contact.
F – Wear any needed Personal
Protective Equipment. Do not
wear loose clothing while
operating or servicing machine.
E
242284 – Located on operators lower
right side
A
B
C
D
A
B
C
D
F
242408 – Located on operator’s lower
left side
A
B
C
D

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Gehl R190 and is the answer not in the manual?

Gehl R190 Specifications

General IconGeneral
Rated Operating Capacity1, 900 lbs
Tipping Load3, 800 lbs
Engine MakeYanmar
Travel Speed7.5 mph
Auxiliary Hydraulic Flow18.5 gpm
Hydraulic System Flow18.5 gpm

Related product manuals