Gehl R190 - DPF Regen Flowcharts

64 50950106/AP0313
DPF Regen Flowcharts
If a SStationary Regen Mode is requested by Machine Operator:
How many hours since last Staonary Regen?
< 50 Hours
> 50 Hours
E– ECU returns to
Normal Operaon
Staonary Regen is not allowed.
Staonary Regen is allowed.
Staonary Regen
See Staonary Regen Procedure for complete details.
DPF SWITCH
Press and hold Staonary Regen Request
switch for 10 seconds, release, then hold
for an addional three seconds.
These icons will appear on
the Electronic display during
the Staonary Regen mode.
E– ECU returns to
Normal Operaon