Gehl R190 User Manual

50950106/AP0313 121
INDEX
A
Accessory Plug . . . . . . . . . . . . . . . 23
Activating The Warming Circuit . . . 27
Adjusting Chain Tension . . . . . . . . 76
Adjustments. . . . . . . . . . . . . . . . . . 72
All-Tach® Hitch . . . . . . . . . . . . . . . 26
Air Conditioner
Operation . . . . . . . . . . . . . . . . 24
Alternator/Fan Belt . . . . . . . . . . . . 88
Attachment Mounting . . . . . . . . . . 26
Auxiliary Hydraulic Controls
High-Flow. . . . . . . . . . . . . . . . 43
Standard-Flow . . . . . . . . . . . . 43
B
Battery. . . . . . . . . . . . . . . . . . . . . . 94
Jump-starting . . . . . . . . . . . . . 50
Before Starting the Engine . . . . . . 47
Bucket Cutting Edge . . . . . . . . . . . 88
Bucket Selection . . . . . . . . . . . . . 117
Bucket Usage . . . . . . . . . . . . . . . . 53
Digging with a Bucket. . . . . . . 53
Driving on an Incline. . . . . . . . 53
Driving over Rough
Terrain . . . . . . . . . . . 53
Dumping into a
Truck (or Hopper) . . 54
Dumping onto a Pile. . . . . . . . 54
Dumping over
an Embankment. . . . 54
Leveling the Ground. . . . . . . . 55
Loading a Bucket . . . . . . . . . . 54
Scraping with a Bucket. . . . . . 55
C
Capacities and Ratings. . . . . . . . 114
Chaincases . . . . . . . . . . . . . . . . . . 75
Checking and Adding Oil . . . . 75
Draining Oil . . . . . . . . . . . . . . 75
Changing Attachments . . . . . . . . . 51
Connecting Attachments . . . . 51
Connecting Auxiliary
Hydraulic Couplings 52
Removing Attachments . . . . . 52
Changing Engine Oil and Filter. . . 80
Changing Fuel Filter . . . . . . . . . . . 81
Changing Hydraulic Oil . . . . . . . . . 88
Changing Hydraulic Oil Filter . . . . 87
Checking and Adding Oil . . . . . . . 75
Checking Coolant Level . . . . . . . . 89
Checking Engine Oil Level . . . . . . 80
Checking Hydraulic Oil Level . . . . 87
Checking the Water Separator . . . 81
Checking Tire Pressure . . . . . . . . 91
Cleaning the Cooling System . . . . 89
Cold-Starting. . . . . . . . . . . . . . . . . 48
Cold-Starting Procedure . . . . . . . . 48
Common Materials
and Densities . . . . . . . . . . . . . . . 116
Component Plate Locations . . . . . 17
Connecting Attachments. . . . . . . . 51
Control/Indicator Symbols. . . . . . 3, 4
CONTROLS . . . . . . . . . and SAFETY
EQUIPMENT 19
Cooling System. . . . . . . . . . . . . . . 89
Cleaning . . . . . . . . . . . . . . . . 89
Coupler Locations
High-Flow . . . . . . . . . . . . . . . 52
Standard-Flow . . . . . . . . . . . . 52

Gehl R190 Specifications

General

Rated Operating Capacity	1, 900 lbs
Tipping Load	3, 800 lbs
Engine Make	Yanmar
Travel Speed	7.5 mph
Auxiliary Hydraulic Flow	18.5 gpm
Hydraulic System Flow	18.5 gpm