To Next Page

To Previous Page

Administrator Mode

Figure 4-28

[Exposure]

◼ Exposure Mode: Select the correct exposure mode to achieve the desired exposure

effect. The default setting is Outdoor with a frequency of 50 Hz.

◼ Shutter (s): The length of time that allows light to enter the lens. You can set a shutter

speed when Exposure Mode is set to Manual (Custom) or Shutter Priority.

Note: If Slow Shutter is set to Off, the reciprocal of the shutter speed must be greater than

the frame rate.

◼ Gain (dB): Control image signals so that the camera outputs standard video signals

according to the light condition. You can set this parameter only when Exposure Mode

is set to Manual (Custom) or Gain Priority.

◼ Iris: Sets the aperture size of the lens. This function is only applicable to GV-SD2322-IR.

GeoVision GV-IP SERIES User Manual

Other manuals for GeoVision GV-IP SERIES