Gestetner 5309L - Page 49

DRAFT 2002/08/02
Operation
42
1
E
EE
E
Turn on the optional tape dis-
penser power switch.
F
FF
F
Set one original face down on the
exposure glass or in the optional
document feeder.
G
GG
G
Press the {
{{
{Master Making}
}}
} key.
H
HH
H
Check the image position of the
trial or proof print.
Note
❒ If the image position is not cor-
rect, adjust it using the {
{{
{Image
Position}
}}
} keys (see ⇒ p.21
“Shifting the Print Image Posi-
tion Forward or Backward”) or
the side tray fine adjusting dial
(see ⇒ p.21 “Shifting the Print
Image Position to the Right or
Left”).
I
II
I
Make your prints.
Note
❒ After the last page of each print-
ing set is fed out to the paper de-
livery tray, the tape dispenser
drops a strip of paper on the top
of the paper stack.
❒ If the power switch of the op-
tional tape dispenser is turned
off or the tape dispenser is not
installed in your machine, the
group printing cycle stops after
each set is delivered. Remove
the set of prints from the paper
delivery tray and press the
{
{{
{Print Start}
}}
} key to start the next
group printing cycle.
TSLP013E
On
Off