Gestetner 5309L - Selecting Original Type

DRAFT 2002/08/02
Selecting Original Type
37
1
Selecting Original Type
Select one of the following three types
to match your originals:
❖
❖❖
❖ Photo mode
Delicate tones of photographs and
pictures can be reproduced with
this mode.
❖
❖❖
❖ Letter mode
Select this mode when your origi-
nals contain only letters (no pic-
tures).
❖
❖❖
❖ Letter/Photo mode
Select this mode when your origi-
nals contain photographs or pic-
tures with letters.
Note
❒ Moire patterns might occur when
screened originals are printed.
❒ When using Photo mode to print
originals with both letter and pho-
tographs, the letter will appear
lighter. To avoid this, select Let-
ter/Photo mode with the {
{{
{Type of
Original}
}}
} key.
A
AA
A
Press the {
{{
{Type of Original}
}}
} key to
select Photo mode.
B
BB
B
Press the {
{{
{Image Density}
}}
} key to ad-
just the image density.
C
CC
C
Set your originals on the exposure
glass or in the optional document
feeder.
D
DD
D
Press the {
{{
{Master Making}
}}
} key.
E
EE
E
Check the image position of the
trial or proof print.
Note
❒ If the image position is not cor-
rect, adjust it using the {
{{
{Image
Position}
}}
} keys (see ⇒ p.21
“Shifting the Print Image Posi-
tion Forward or Backward”) or
the side tray fine adjusting dial
(see ⇒ p.21 “Shifting the Print
Image Position to the Right or
Left”).
F
FF
F
Make your prints.