Gestetner 5309L - Adjusting the Print Image Position; Shifting the Print Image Position Forward or Backward; Shifting the Print Image Position to the Right or Left

DRAFT 2002/08/02
Adjusting the Print Image Position
21
1
Adjusting the Print Image Position
After master making, you can adjust
the print image position to suit your
needs. There are two ways:
❖
❖❖
❖ Shifting the Image Position Forward
or Backward
Shift the image position using the
{
{{
{Image Position}
}}
} keys.
❖
❖❖
❖ Shifting the Image Position to the
Right or Left
Shift the image position using the
side tray fine adjusting dial.
Shifting the Print Image
Position Forward or Backward
* Paper feed direction
A
AA
A
Press the left {
{{
{Image Position}
}}
} key
to move the image forwards, the
right key to move it backwards.
Note
❒ When you shift the image for-
wards, leave a margin (more
than 5 mm, 0.2") at the leading
edge. If there is no margin, pa-
per might wrap around the
drum and cause a misfeed.
❒ The right or left {
{{
{Image Position}
}}
}
keys shift the image about 0.5
mm, 0.02" each time they are
pressed. When the indicator
changes, the image position
shifts about 5 mm, 0.2".
B
BB
B
Press the {
{{
{Proof}
}}
} key to check the
image position.
Shifting the Print Image
Position to the Right or Left
* Paper feed direction
GRFORW0E
GRLEFT0E