Gestetner 5309L - Memory Mode with the Document Feeder

DRAFT 2002/08/02
Printing Using the Optional Document Feeder
59
2
D
DD
D
Press the {
{{
{Master Making}
}}
} key.
E
EE
E
Check the image position of the trial or proof print.
Note
❒ If the image position is not correct, adjust it using the {
{{
{Image Position}
}}
} keys
(see ⇒ p.21 “Shifting the Print Image Position Forward or Backward”) or
the side tray fine adjusting dial (see ⇒ p.21 “Shifting the Print Image Posi-
tion to the Right or Left”).
❒ After the first original has been stored, the second original is fed.
❒ If you set only one original, the beeper sounds after the first original has
been stored. Set the second original and the desired image settings. Then,
press the {
{{
{Master Making}
}}
} key.
F
FF
F
Enter the number of prints with the number keys.
G
GG
G
Make your prints.
Memory Mode with the Document Feeder
Note
❒ To prevent original misfeeds, do not set originals of different sizes.
❒ Do not set more than 30 originals at a time in the optional document feeder.