Getinge 600 Series - Sterilizer Dimensions

Tec h ni ca l Da ta
7–2 INS 61301607027 Rev A US
STERILIZER DIMENSIONS
INTERIOR DIMENSIONS The following table lists interior dimensions for 600 Series Steam
Sterilizers.
EXTERIOR DIMENSIONS
(WITH CABINET PACKAGE)
The following table lists the exterior dimensions for the 600 series steam
sterilizers.
NOTE
The 633HC sterilizer requires a minimum wall opening of 965 mm (W) x
1861 mm (H) (38.0 in. x 73.25 in).
TABLE 7–1. 600 SERIES STERILIZER INTERIOR DIMENSIONS
MODEL WIDTH HEIGHT LENGTH VOLUME
633HC/633LS
Single Door
672 mm (26.4 in.) 672 mm (26.4 in.) 660 mm (26.0 in) 298 L (10.5 cu. ft.)
1000 mm (39.4 in.) 452 L (16.0 cu. ft.)
1300 mm (51.2 in.) 588 L (20.9 cu. ft.)
633HC/633LS
Double Door
672 mm (26.4 in.) 672 mm (26.4 in.) 1000 mm (39.4 in.) 452 L (16.0 cu. ft.)
1300 mm (51.2 in.) 588 L (20.9 cu. ft.)
TABLE 7–2. 600 SERIES STERILIZATION EXTERIOR DIMENSIONS
MODEL
CHAMBER
LENGTH
WIDTH HEIGHT LENGTH
633HC/633LS
Single Door
600 mm (26.0") 1003 mm (39.5") 1882 mm (74.1") 1061 mm (41.8")
(without steam boiler)
1644 mm (64.8")
(with steam boiler)
1000 mm (39.4") 1368 mm (53.9")
1300 mm (51.2") 1671 mm (67.8")
633HC/633LS
Double Door
1000 mm (39.4") 1003 mm (39.5") 1882 mm (74.1") 1230 mm (48.4")
1300 mm (51.2") 1524 mm (60.0")