Getinge 600 Series User Manual

Installation Instructions
4–32 INS 61301607027 Rev A US
INSTALLING THE LOADING CAR
TRACK
To install the loading car track:
1. Align the holes in the bottom of the track with the mounting studs on
the floor of the chamber.
2. When the track is correctly aligned, with the mounting studs, it will drop
into place.
FIGURE 4–29. ALIGNING THE TRACK WITH THE MOUNTING STUDS
A07027-CF

Getinge 600 Series Specifications

General

Brand	Getinge
Model	600 Series
Category	Laboratory Equipment
Language	English