Getinge 9128 - Manual Calibration

Manual calibration (2.1.6.2.1)
49,1 C
WASH1 TEMP SP
P1 HC SHORT 00:12:24
01 STANDBY 00:02:22
A34 I/O FAULT
00:03:00
WASH1 TIME
128,1 C
DRYER TEMP
CANCEL
OK
MANUAL CALIBRATION
SENSOR GAIN OFFSET VALUE
00 CHAMBER TEMP 1,000 0,0 49,1
01 DRYER TEMP 1,000 0,0 128,0
02 DRAIN TEMP 1,000 0,0 9,999
03 BOOSTER TEMP 1,000 0,0 1,205
05 DISCHARGE PRESS 1,000 0,0 43,1
06 CONDUCTIVITY FR 1,000 0,0 9,999
000724
1
1. VALUE
The "Value" field cannot be edited. It displays the current sensor value.
The PRINT button is displayed in standby mode and prints a list of all specified sensors.
Page 47 of 166
<Doc_TEC><Doc_6001341502><Rel.A><Lang_en>