Getinge 9128 - Edit Cycles

Edit cycles (2.1.6.4.1)
49,1 C
WASH1 TEMP SP
P1 HC SHORT 00:12:24
01 STANDBY 00:02:22
A34 I/O FAULT
00:03:00
WASH1 TIME
128,1 C
DRYER TEMP
CANCEL HOME OK
000736
EDIT CYCLES
1 HC SHORT
3
2
1
1. OK
2. HC SHORT
3. EDIT CYCLES
When the cycle number is highlighted, ENTER will allow the number to be edited using the up/down
cursor keys to increase/decrease the number. If two or more numbers are equal when SAVE is pushed, a
message "TWO OR MORE SEQ. NUMBERS EQUAL" will be displayed for three seconds and then return
to save mode.
When cycle name is selected, ENTER will move to the menu below (2.1.6.4.1.1).
Page 62 of 166
<Doc_TEC><Doc_6001341502><Rel.A><Lang_en>