Getinge 9128 - Automatic Calibration Setting Hi

Automatic calibration setting Hi (2.1.6.2.2.2)
49,1 C
WASH1 TEMP SP
P1 HC SHORT 00:12:24
01 STANDBY 00:02:22
A34 I/O FAULT
00:03:00
WASH1 TIME
128,1 C
DRYER TEMP
CANCEL
HIGH
SAVE
SCROLL
UP
SCROLL
DOWN
+/-
AUTOMATIC CALIBRATION
SENSOR GAIN OFFSET VALUE
00 CHAMBER TEMP 1,000 0,0 49,1
LOW REF 0.0 HIGH REF 0.0
000727
2
1
3
1. HIGH REF
2. HIGH SAVE
3. CANCEL
CANCEL opens the Select automatic sensor calibration (2.1.6.2.2).
Use the HIGH SAVE button to confirm the reference HIGH and open the screen where a calibration
protocol can be printed (2.1.6.2.2.3).
The values for increasing and compensation as recalculated.
Page 50 of 166
<Doc_TEC><Doc_6001341502><Rel.A><Lang_en>