GFA TS981 - P 9.5 - Reset to Factory Settings; Use of Gfa-Stick; P 9.7 - Loading Software; P 9.8 - Saving the Software

44
P 9.5 - Reset to factory settings / use of GfA-Stick
Activate the GfA-Stick with option .0 The GfA-Stick (part no. 20003696) allows readout of faults, operations,
and programming by using the GfA App. With option . 1, you delete all set menu items and reset the door
control to factory setting.
9.5
Reset to factory settings / use of GfA-Stick
.0
Activate GfA-Stick.
.1
Reset to factory settings.
 Press the OPEN Button once to select menu item . 1.

Confirm your selection by pressing the STOP Button for 3 seconds.
P 9.7 - Loading Software
Software can be loaded from a memory card in the MMC/SD slot with menu item 9.7. When selecting the
menu item, software version 0 appears on the display.
All software versions on the memory card can be displayed by pressing the OPEN and CLOSE push-buttons.
Load the software by pressing the STOP push-button for 3 seconds. Press the selector switch to exit the menu
item without loading any software.
9.7
Loading software
-.-

Select the software version on the card by turning, e.g.,
1.1
.

Confirm your choice by pressing the STOP push
-
button for 3 seconds.
i
NOTE
Back up the old version before
loading the new software.
P 9.8 - Saving the software
Use menu item 9.8 to back up the current software version of the door control to the memory card.
9.8
Saving the software

Insert the memory card.
 Select the menu item.

Press the selector switch once.