5
Safe operation
The safe operation of the product can only be ensured if it is used as specified. Follow the installation
instructions. Observe all specifications, especially warnings, when installing the product in the overall system.
GfA is not liable for damage resulting from non-observance of the installation instructions. The resulting
overall system must be reassessed for its safety in accordance with applicable standards and directives (e.g. CE
marking). These installation instructions refer only to a part of the overall system and are not sufficient as the
sole instructions for the overall system. The installer of the system must prepare the instructions for the
overall system. We recommend entering the danger area of the system only when the drive unit is at a
standstill.
General safety instructions
Failure to follow these installation instructions may result in severe injury or
Please read these instructions before using the product.
Keep these instructions handy.
Include these instructions when passing on the product to third parties.
Danger from improper use of the product!
Do not let children operate the
product unsupervised or use as a toy.
Danger to life from incorrect installation!
Work carried out improperly may result in death or severe injury from electrical current or falling parts
Allow only competent people to carry out the work.
Disconnect all cables from the power supply.
Observe valid regulations and standards.
2 Storage
Store the product in the original packaging.
Note the following environmental conditions for storage:
Closed, dry, dark and vibration-free rooms
Temperatures between +5 °C and +40 °C
Relative humidity less than 93 %, non-condensing
Dust protected
Protected against corrosion (e.g. protection against saltwater)
Protected against chemicals
3 Transport
Avoid bumps, impacts and vibrations during transport. Do not throw the product.