Configuring Omnia PCB GVR Cloud Registration Insite360 Configuration
Page 5-44 MDE-5369G FlexPay™ IV (with Omnia V04.07) Programming and Service Manual · March 2021
Figure 5-62: Registration OK
If the registration is unsuccessful, a dialog box as shown in Figure 5-63 opens after 1-2
minutes.
Figure 5-63: Registration KO (Failure) Message
Figure 5-64: Pre-registration KO (Failure) Message
If the registration is unsuccessful after multiple attempts, refer to “Troubleshooting” on
page 7-1.
To Next Page
Loading...