52
Fryer Operation
EOF 10-10/20
5-01.6 Cooking Cycle, General Overview - Continued
The temperature SETPOINT, MENU NAME, and COOKING TIME currently
selected are shown on the OLED Display of each Vat.
When in READY state the Temperature setpoint is shown on 7-Segment Display
of each Vat. The READY message indicates that the cooking oil is at proper
temperature and the Vat is ready for cooking.
To start the cook cycle press the START key once.
Prompt is displayed on each side for selecting which Vat to start
After selecting Vat, the Controller enters COOK state. If the Fryer is equipped
with automatic Basket Lifts, the Basket will be lowered into the cooking oil and
the programmed Menu Cooking Time will begin counting down on the 7-
Segment Display of that Vat. The OLED Display shows that the Vat is COOKING,
as well as displaying the programmed setpoint temperature. The Vat Timer
Indicator is illuminated.
The other Vat Timer can be stated if desired. To start the cook cycle press the
{START] key once.
Prompt is displayed on the idle side display to select the other Vat. Pressing the
appropriate arrow key [4] or [6] will start Timer. 7-Segment Display of that Vat
begins countdown.
EOF10-10, DUAL DISPLAY
Continued on Next Page
To Next Page
Loading...
