vii
Safety
EOF 10-10/20
Safety Overview
Safety
Hazard Alert Symbols are used in conjunction with key words DANGER, WARNING, and CAUTION to
alert user to potential personal injury hazards and/or poor operating practices. These will immediately precede pre-
cautionary measures pertaining to such hazards or practices. Adhere to all safety messages which follow these sym-
bols to avoid possible injury, or even death. Failure to do so may also void the factory warranty.
The instructions contained in this manual have been prepared to aid you in learning the proper procedures for
installing, operating and servicing your new Giles Model EOF Series Electric Fryers.
Throughout this manual, safety precautions are identified through the use of the safety alert symbol and three sig-
nal words: DANGER
, WARNING and CAUTION. All safety alert information precedes the tasks to which they apply.
Suggested, recommended, or other noteworthy information is identified through the use of NOTES, or be noted as
IMPORTANT!. Additionally, certain words are used to indicate a specific meaning or to add emphasis as follows:
Shall: understood to be mandatory.
Should: understood to be advisory.
May: understood to be permissive.
Will: indicates a future event or condition to occur.
• Indicates an imminently hazardous situation which, if not avoided, will result in serious personal injury, even
death.
• Indicates a potentially hazardous situation which, if not avoided, could result in serious injury, even death.
• Indicates a potentially hazardous situation which, if not avoided, may result in minor to moderate injury. This
notification is also used as an alert to unsafe practices.
• If used without the safety alert symbol, indicates a potentially hazardous situation which, if not avoided, may
result in equipment and/or property damage, and may void the factory warranty.
NOTE or IMPORTANT!
•Identifies suggested, recommended, or other important information.
To Next Page
Loading...
