72
Fryer Operation
EOF 10-10/20
This section explains the process of shutting down the Fryer.
1. Set Heat Switch
① on all Fryers to OFF position.
2. Place Power Switch
② on all Fryers in the OFF
position. Green Power lights will turn OFF.
3. If required, turn off supply power to each Fryer unit
at the main electrical panel.
In case of emergency, remove supply power to the unit by switching off main circuit breakers or disconnects within
the building.
5-06. Normal Shut-Down
5-07. Emergency Shut-Down
EOF-20
EOF10-10
2
2
1
1
1
To Next Page
Loading...
