38
Fryer Operation
GBF-70 Fryer
4.01.5.1 Editing a Menu Item Preset - continued
Edit FISH FILTER Setting:
To minimize potential for flavor transfer, establishments that cook seafood may wish to force operators to filter oil
after only cooking one (1) batch in the fryer. When FISH FILTER is set to [ON], the unit will enter FILTER MODE
after completing one load of a specific item. If FORCE FILTER SNOOZE is set to [ON] in User Settings (Section
4.01.10), an additional load may be cooked before filtering is forced. If FORCE FILTER=[OFF] a filter warning
message is displayed on the controller; if FORCE FILTER=[ON], the fryer is locked out until a filter cycle is completed.
To edit FISH FILTER
setting, scroll to and select [FISH FLTR] as described previously ... [—>] points to [FISH FLTR]
Press the [START] key to toggle between the available options.
Exit EDIT function:
After completing and saving edits to a Menu Item Preset, press either the [CLEAR] key or the [EDIT] key to exit that
preset. The arrow keys [2] • [8] remain active and can be used to scroll to a different preset to edit.
Press the [CLEAR] key again to completely exit EDIT.
To Next Page
Loading...
