Chapter 5
CHAPTER 5 | TROUBLESHOOTING
When troubleshooting, try to check each part of the system independently. Check the
solvent bottles, the connections between the bottles and pump heads, inlet filters, outlet
filters, and so on. Check each component in the circuit, even if it is new.
To receive notification of and to designate instructions for response to error states in
TRILUTION LC, users must define parameters in the Method - Error Handling tab.
Error messages appear on the control panel display or are indicated by the ERROR light.
IN THIS CHAPTER
● Error LED (333 Pump) | 54
● Error Messages (333 Pump) | 55
● Troubleshooting | 56
● Repair and Return Policies | 58
53
333/334 HPLC PUMPS | USER’S GUIDE
To Next Page
Loading...
