62
REPLACEMENT PARTS | 333/334 HPLC PUMPS
RepLACeMenT pARTS
Miscellaneous (Tools, Power Cords, Cables, etc.)
PART NUMBER DESCRIPTION
38013280 Solvent Bottle tray
38013228 Tubing clip, PP, for 3.2 mm, 1/8” for bottle tray
38013229 Tubing clip, PP, for 4.8 mm, 3/16” for bottle tray
38073202 Drip pan, PP, with drain tubing (silicone, 4 x 6 mm, 1000 mm)
470223639 Tubing, silicone, 4 x 6 mm, 1 meter (drip pan tray)
7080318107 Power Cord for 110V
7080316106 Power Cord for 220V
36610101 Spanner for tubing nuts, 6.3–7.9 mm (1/4”–5/16”)
38013236 Spanner for check valve holder, 14 mm
4320302 Allen wrench, 3 mm (rear-end, to release pump head)
4320502 Allen wrench, 5 mm (front-end, to remove pump head)
38013235 Bellows mounting tool, POM, white, piston assembly, for pump heads
4340431 Wrench, Open End, 3/8 and 7/16” (9 and 11 mm), Double Ended
36078143 GSIOC Cable, Shielded, 30”
638310512 10-pin Terminal Block Connector for Input and Output Contacts
638314512 14-pin Terminal Block Connector for Output Contacts
36460058 Priming Syringe, Glass, 10 mL
38013234 Glass bottle (Piston Rinse)
Service Part
Replacing this part may require assistance from your technical service representative.
PART NUMBER DESCRIPTION
38013342 333 Pressure, Purge and Mixing Module (PPMM)
To Next Page