GKB 4CH/8CH VFire Server
99
Click on this icon to enable/mute the audio input from the PC, button down for
enable, button up for mute. If enabled, the audio input from the PC will be sent
to the DVR/NVR. The default setting is ‘mute’.
Click on this icon to enable/mute the audio output from the camera for the focus
window (or DVR/NVR), button down for enable, button up for mute.
Click on this icon to show/hide the GPS data for (1) the selected DVR/NVR, or (2) the
DVR/NVR for the focus camera, button down to show, button up to hide.
Click on this icon to show/hide the POS data (for 9-split-window or larger video
window) for (1) the selected DVR/NVR, or (2) the DVR/NVR for the focus camera,
button down to show, button up to hide.
Click on this icon to backup video/audio, and the Backup dialog will be shown.
Please select the DVR/NVR, cameras, event type, destination directory, execution
time, and data range, and then click on “Apply” or “OK” to backup, or “Cancel” to
cancel. Please note that Execution of “Now” or “Once” is one-time backup, while
“Daily” is daily backup.
Click on this icon for snapshot of the focus camera.
Click on this icon for audio broadcasting to all connected DVR/NVRs.
Click on this icon to toggle between full screen display and normal I.E. display.
Click on this icon for full video display (without any icon).
The device name of the selected DVR/NVR is shown. Click on this icon, and the
available DVR/NVRs will all be shown. The user may type alphanumeric
To Next Page
Loading...