GME TX6600PRO - Page 51

TX6600PRO INSTRUCTION MANUAL
47
1. Press
CALL
LOCK
to enter the CALL Menu.
2. Rotate the Channel knob or press the keys to cycle to the
OWNID option then press
MENU
F
to select. id is displayed along with
your radio’s Ident or Alpha name.
3. Press
MENU
F
to toggle between Ident and Alpha mode to select the
Ident then hold
MENU
F
. The right-hand digit will be ashing.
4. Rotate the Channel knob or press the keys to select the
desired number in the ashing digit position.
5. Press
MENU
F
to advance to the next position.
6. Repeat steps 4 & 5 to enter all 5 digits of your new SelCall Ident, then
hold
MENU
F
to save. The Ident will ash 3 times to conrm it has been
saved.
7. To edit the Alpha Name, briey press
MENU
F
to toggle to the Alpha
mode then hold
MENU
F
. The left-hand character will be ashing.
8. Repeat steps 4 & 5 to edit the Alpha Name. When the desired label is
displayed, hold
MENU
F
to save. The Ident will ash 3 times to conrm it
has been saved.
9. Press
CALL
LOCK
to return to the CALL sub-menu.
10. Press
CALL
LOCK
again to return to normal operation.
Saving a New SelCall Ident in your Contact List
1. Press
CALL
LOCK
to enter the CALL Menu.
2. Rotate the Channel knob or press the keys to cycle to the
SAVED option then press
MENU
F
to select.
3. Rotate the Channel knob or press the keys (if necessary) to
cycle through your contacts until ‘– FREE –’ is displayed. This indicates
the next available empty contact memory.
4. Hold
MENU
F
to select this location.
• If the edit eld displays ‘00000’ and the right-hand digit is
ashing, the radio is in Ident mode.
• If the edit eld is blank and the left-hand character is ashing,
the radio is in Alpha mode.
5. Rotate the Channel knob or press the keys to select the
desired number or character in the ashing position.