GME TX6600PRO - Page 74

TX6600PRO INSTRUCTION MANUAL
70
Duplex Toggle
1. Select the desired repeater channel (CB1-8, CB31-38 or a duplex
private channel).
2. Press the programmed Duplex Toggle key to toggle Duplex ON or
OFF on the selected channel. The icon indicates when Duplex is
On.
NOTE: Duplex cannot be enabled on Simplex channels.
Duplex Menu
1. Select the desired repeater channel (CB1-8, CB31-38 or a duplex
private channel).
2. Press the programmed Duplex Menu key to access the Duplex menu.
3. Rotate the Channel knob or press the keys to select Duplex ON or
OFF on the selected channel. The icon indicates when Duplex is On.
NOTE: Duplex cannot be enabled on Simplex channels.
4. Press the
MENU
F
key to exit or wait a few seconds for the menu to time-out.
Dynamic Volume Control Toggle
Press the programmed Dynamic Volume Control Toggle key to toggle the
Dynamic Volume Control ON or OFF.
Dynamic Volume Control Menu
1. Press the programmed Dynamic Volume Control Menu key to
access the Dynamic Volume Control menu.
2. Rotate the Channel knob or press the keys to select ON or OFF.
3. Press the
MENU
F
key to exit or wait a few seconds for the menu to time-out.
Emergency
Press the programmed Emergency key to immediately send a designated
Emergency SelCall transmission to other radios in your group. During this time
your radio will sound an alarm and display EMERGENCY. The emergency SelCall
transmissions will continue until cancelled by the Exit Emergency key.
Other radios in your group that receive the Emergency signal will also sound an
alarm and ALARM will be displayed on the LCD.