GME TX6600PRO - Page 84

TX6600PRO INSTRUCTION MANUAL
80
Silent Squelch Tail (SST) Menu
The Silent Squelch Tail function removes the short burst of noise that is heard in
the speaker just before the Squelch closes at the end of a transmission.
1. Press the programmed Silent Squelch Tail Menu key to access the
Silent Squelch Tail menu.
2. Rotate the Channel knob or press the keys to switch the Silent
Squelch Tail setting ON or OFF. SST ON or SST OFF will be displayed.
3. Press the
MENU
F
key to exit or wait a few seconds for the menu to time-out.
Squelch Toggle
Press the programmed Squelch Toggle key to toggle the squelch Open or Closed.
• When the squelch is open, SQLCH OPn will appear briey and the
receiver noise will be heard in the speaker.
• When the squelch is closed, SQLCH CLS will appear briey and the
receiver will remain quiet.
Squelch Menu
1. Press the programmed Squelch Menu key to enter the Squelch menu.
2. Rotate the Channel knob or press the keys to Open or Close the
Squelch.
• When the squelch is open, SQLCH OPn will appear and the
receiver noise will be heard in the speaker.
• When the squelch is closed, SQLCH CLS will appear and the
receiver will remain quiet.
3. Press the
MENU
F
key to exit or wait a few seconds for the menu to time-out.
Squelch Level
The Squelch level sets the sensitivity of the Squelch to incoming signals.
1. Press the programmed Squelch Level key to enter the Squelch Level
menu.
2. Rotate the Channel knob or press the key to adjust the
Squelch level from a minimum of 1 to a maximum of 9.
3. Press the
MENU
F
key to exit or wait a few seconds for the menu to time-out.