GME TX6600PRO - Page 83

TX6600PRO INSTRUCTION MANUAL
79
Selcall Menu
1. Press the programmed SelCall Menu key to access your SelCall
Contact list.
2. Rotate the Channel knob or press the keys to select from the
available SelCall contacts (or select FREE to add a new contact - see
the SelCall section of the User Manual for details)
3. Hold the CALL key to send the SelCall.
Selcall Alpha Select
View a SelCall contact as either a numeric Ident or an alpha name.
1. Press the programmed SelCall Alpha Select key to access the SelCall
Alpha Selection Menu.
2. Rotate the Channel knob or press the keys to switch the
SelCall Alpha setting ON or OFF.
SCALPH ON or SCALPH OFF will be displayed.
• SCALPH ON: The SelCall contact’s alpha name will be displayed.
• SCALPH OFF: The SelCall contact’s numeric Ident will be
displayed.
3. Press the
MENU
F
key to exit or wait a few seconds for the menu to time-out.
Selcall Alpha Toggle
View a SelCall contact as either a numeric Ident or an alpha name.
Press the programmed SelCall Alpha Toggle key to switch the SelCall Alpha setting
ON or OFF.
SCALPH ON or SCALPH OFF will be displayed.
• SCALPH ON: The SelCall contact’s alpha name will be displayed.
• SCALPH OFF: The SelCall contact’s numeric Ident will be displayed.
Silent Squelch Tail (SST) Toggle
The Silent Squelch Tail function removes the short burst of noise that is heard in
the speaker just before the Squelch closes at the end of a transmission.
Press the programmed Silent Squelch Tail Toggle key to toggle the Silent
Squelch Tail function ON or OFF.
SST ON or SST OFF will be displayed.