Access control............................................................................................................................................................... 5.
Door panel installation................................................................................................................................................. 7.
Location of the embedding box................................................................................................................................. 7.
Positioning the embedding box............................................................................................................................. 7......
Securing the frame and closing the panel.................................................................................................................. 7.
Description of the module.............................................................................................................................................8
Description of the N3301/AL - NX3301 module..........................................................................................................8
Description of the JP1 jumper....................................................................................................................................8
Description of the SW1 DIP switch............................................................................................................................ 8.
Description of the beeps............................................................................................................................................8
Description of the self-testing LEDS ......................................................................................................................... 9...
Power supply unit installation....................................................................................................................................... 9..
Detail of the TF-104 power supply unit installation .....................................................................................................9.
Lock release installation...............................................................................................................................................9
Module operation...................................................................................................................................................... 10.
Description of module operation..............................................................................................................................10
Module programming.................................................................................................................................................11.
Programming mode entry and exit...........................................................................................................................11.
Programming mode structure and sequence...........................................................................................................11.
Programming fields........................................................................................................................................... 12-20.
Factory setting........................................................................................................................................................21.
Wiring diagrams.........................................................................................................................................................22
CONTENTS
CHARACTERISTICS
The standalone access control enables access to the building by entering a numeric code using the N3301 module.
To Next Page
Loading...
