The percentage of power during charging or discharging compared to
the rated power of the inverter.
Charge/Discharge Cut-off
SOC
The battery stop charging/discharging once the battery SOC reaches
Charge Cut-off SOC.
After setting the parameters, click Complete to restart.
8.3 Communication Settings
Communication settings can only be set through SolarGo APP.
The communication configuration interface may vary depending on the type of
smart dongle connected to the inverter. Please refer to the actual interface for
accurate information.
Step 1: Enter the setting page through "Home" > "Settings" > "Communication
Configuration" > "Network Settings".
Step 2: Configure the WLAN or LAN network based on the actual situation.
To Next Page
Loading...