11 Maintenance
11.1 Power OFF the System
Power off the equipment before operations and maintenance. Otherwise, the equipment
may be damaged or electric shocks may occur.
Delayed discharge. Wait until the components are discharged after power off.
Push the air switch to restart the battery.
Strictly follow the power off requirements to avoid damaging the system
When there are multiple batteries in the system, powering off any one of the batteries
can power off all the batteries.
Install the circuit breaker between the inverter and the battery or between the two
batteries in compliance with local laws and regulations.
To ensure effective protection, the cover of the battery system switch should remain
closed. The cover can be closed automatically after being opened. Fasten the cover with
screws if the switch is not to be used for a long-term period.
Single inverter system power off
To Next Page
Loading...