Keep Power Off before any operations to avoid danger. Strictly follow all safety
precautions outlined in this manual and safety labels on the equipment during the
operation.
Do not disassemble, modify, or replace any part of the battery or the power control unit
without official authorization from the manufacturer. Otherwise, it will cause electrical
shock or damages to the equipment, which shall not be borne by the manufacturer.
Do not hit, pull, drag, squeeze or step on the equipment or put the battery into fire.
Otherwise, the battery may explode.
Do not place the battery in a high temperature environment. Make sure that there is no
direct sunlight and no heat source near the battery. When the ambient temperature
exceeds 60 ℃, it will cause fire.
Do not use the battery or the power control unit if it is defective, broken, or damaged.
Damaged battery may leak electrolyte.
Do not move the battery system while it is working. Contact after-sales service if the
battery shall be replaced or added.
A short circuit in the battery may cause personal injury. The instantaneous high current
caused by a short circuit can release a large amount of energy and may cause a fire.
Factors such as: temperature, humidity, weather conditions, etc. may limit the battery's
current and affect its load.
Contact after-sale service immediately if the battery is not able to be started. Otherwise,
the battery might be damaged permanently.
Inspect and maintain the battery regularly according to the maintenance requirements
of the battery.
To Next Page
Loading...