medical assistance.
Skin contact: Thoroughly wash the touch area with soap and clean water, and seek
immediate medical assistance.
Ingestion: Induce vomiting, and seek immediate medical assistance.
Fire
The battery may explode when the ambient temperature exceeds 150℃. Poisonous and
hazardous gas may be released if the battery is on fire.
In the event of a fire, please make sure that the carbon dioxide extinguisher or Novec1230
or FM-200 is nearby.
The fire cannot be put out by ABC dry powder extinguisher. Firefighters are required to wear
full protective clothing and self-contained breathing apparatus.
Battery triggers fire protection
For batteries with fire protection functions, perform the following operations after the fire
protection function is triggered:
Immediately cut off the main power switch to ensure that no current passes through the
battery system.
Conduct a preliminary inspection of the appearance of the battery to determine if there is
any damage, deformation, leakage, or odor. Check the battery casing, connectors, and
cables.
Use temperature sensors to detect the temperature of the battery and its environment,
ensuring there is no risk of overheating.
Isolate and label damaged batteries, and handle them properly in accordance with local
regulations.
2.3.4 Smart Meter Safety
If the voltage of the power grid fluctuates, resulting in the voltage to exceed 265V, in this
case, long-term overvoltage operation may cause damage to the meter. It is recommended
to add a fuse with a rated current of 0.5A on the voltage input side of the meter to protect
it.
2.4 Safety Symbols and Certification Marks
All labels and warning marks should be visible after the installation. Do not cover, scrawl,
To Next Page
Loading...