5.5 Installing the Battery System
Ensure that the battery system is installed vertically and securely. When using the locking
bracket, the bracket should be vertically attached to the wall and the surface of the battery
system.
Cover the equipment with a cardboard to prevent foreign matters when drilling holes.
Otherwise, the system may be damaged.
After marking the drilling position with a marker pen, the battery system needs to be moved
away to avoid equipment damage caused by the impact drill when drilling.
Cover the equipment with a cardboard to prevent foreign matters when drilling holes.
Otherwise, the system may be damaged.
LX A5.0-30: Floor-mounted installation
Up to 6 batteries can be stacked for floor-mounted installation.
Step 1: Place the battery vertically, and remove the battery handles.
Step 2: Install brackets on the battery, and secure them with screws.
To Next Page
Loading...