Goodwe GW10K-ES-C10 - Setting the Basic Information

131
7
DNS Server
according to the information of the router or switch.
9.4 Setting the Basic Information
9.4.1 Setting the Basic Information
9.4.1.1 Shadow Scan
This function supports settings through the SolarGo app or LCD screen.
Method I: Setting via SolarGo APP
Step 1: Tap Home> Settings > Basic Settings, to set the parameters.
Step 2: Set the function based on actual needs.
Number
Parameter
Description
1
Shadow Scan
Enable Shadow Scan when the PV panels are
severely shadowed to optimize the power
generation efficiency.
Method II: Setting via LCD
Step 1: Click on the screen or select the settings icon >System Setup>Advanced
Function through the button to enter the settings page. (Advanced Function initial
password: 123456)
Step 2: Set the function based on actual needs.