Goodwe GW10K-ES-C10 - Connecting the Power Cable between the Inverter and Battery

77
2
RS485B
RS485B
3
Parallel OUT+
Parallel OUT+
Parallel communication port
4
CAN_H
CAN_H
Connect the inverter communication port
or battery parallel communication port
5
CAN_L
CAN_L
6
Parallel OUT 2
Parallel OUT 2
Communication port for parallel system
7
-
-
Reserved
8
Parallel OUT-
Parallel OUT-
Communication port for parallel system
6.6.1 Connecting the Power Cable between the Inverter and Battery
WARNING
 Measure the DC cable using the multimeter to avoid reverse polarity connection. Also,
the voltage should be within the permissible range.
 Connect the battery cables to the corresponding terminals such BAT+, BAT- and
grounding ports correctly. Otherwise it will cause damage to the inverter.
 Ensure that the whole cable cores are inserted into the terminal holes. No part of the
cable core can be exposed.
 Ensure that the cables are connected securely. Otherwise it will cause damage to the
inverter due to overheat during its operation.
 Do not connect one battery pack to more than one inverter at the same time. Otherwise,
it may cause damage to the inverter.
Overview of inverter and battery power cable