8 Quick System Commissioning
8.1 Commissioning Method Introduction
This series of inverters includes both those with LCD screens and those without screens.
The inverter without LCD screen only supports setting the inverter through SolarGo APP.
The inverter with LCD screen supports setting the inverter through LCD screen and SolarGo
APP.
8.1.1 Introduction to LCD Screen
Through the LCD screen, users can:
1. Check the operating data, software version, alarm information, etc. of the device.
2. Set parameters, safety code, power limit, etc.
Inverter LCD screen interface
For inverters with screen, users can quickly configure them through the LCD screen. This
screen is a touch screen, and users can directly click on the (Settings) icon in the
upper right corner of the screen to enter the system settings interface and complete the
inverter function settings according to actual needs. You can also complete the inverter
function settings by pressing the buttons (UP), (DOWN), (ENTER),
(EXIT) on the inverter.
To Next Page
Loading...