Goodwe GW10K-ES-C10 - Page 98

98
network at 100Mbps is abnormal.
 The connection of the wired
network at 100Mbps is normal.
Yellow
Steady on
The connection of the wired network
at 10Mbps is normal, but no
communication data is received or
transmitted.
Blinks
The communication data is being
transmitted or received.
Off
The Ethernet cable is not connected.
Button
Description
Reload
Press and hold for 0.5 to 3 seconds to reset the Smart Dongle.
Press and hold for 6 to 20 seconds to restore the Smart Dongle to
factory settings.
Ezlink3000
Indicator/
silkscreen
Color
Status
Description
Power light
Blue
Blink = The Ezlink is working properly.
OFF = The Ezlink is powered off.
Communica
tion
indicator
Green
ON = The Ezlink is connected to the server.
Blink 2 = The Ezlink is not connected to the
router.
Blink 4 = The Ezlink is connected to the router,
but not connected to the server.
RELOAD
-
-
 Short press for 3s to restart the Ezlink.
 Long press for 3-10s to restore factory
settings.