Step 3: Place the battery flat and stack multiple batteries. Ensure that the locating pin is inserted
into the locating hole.
LX A5.0-30: Rack-mounted Installation
It is recommended to install it in a 19-inch standard rack with a length * width of 600*800mm
and above, and the height should be determined based on the thickness of the battery
(133mm) and above.
For rack-mounted installation, electrical labels and warning labels need to be attached to any
position of the front panel of the battery (these labels are shipped as additional accessories).
Step 2: Place the battery on the guide rail of the rack and secure the battery to the rack with screws
from the handle.
To Next Page
Loading...