Goodwe GW10K-ES-C10 - Page 151

151
change the parameters without the prior consent of the grid company.
9.5.2.1 Setting the Active Power Mode
Setting the P(F) Curve
Step 1: Tap Home > Settings > Advanced Settings > Safety Parameters > Active Power
Mode Settings to set the parameters.
Step 2: Set the parameters based on actual needs.
Setting the P(U) Curve
Step 1: Tap Home > Settings > Advanced Settings > Safety Parameters > Active Power
Mode Settings to set the parameters.
Step 2: Enter the parameters. The inverter will adjust the active output power to the
apparent power ratio in real-time according to the actual grid voltage to the rated voltage
ratio.