Goodwe GW10K-ES-C10 - Page 179

179
after restarting the generator, please
contact your dealer or after-sales service
center.
21
Generator high
voltage/
F25:Generator high
voltage
1. Generator is not
connected.
2. The generator is
faulty.
3. The voltage setting
of the generator
exceeds the
requirements of
the specification.
In case the generator is not connected,
ignore this fault. If a generator is
connected, immediately stop the
generator operation. Check if the
generator has any fault and if the voltage
setting meets the requirements. If the
generator is in good condition and the
voltage setting does not exceed the
requirements, but the fault still exists
after restarting the generator, please
contact your dealer or after-sales service
center.
22
Generator low
frequency/
F26:Generator low
frequency
1. Generator is not
connected.
2. The generator is
faulty.
3. The generator
frequency setting
is lower than the
requirements of
the specification.
In case the generator is not connected,
ignore this fault. If a generator is
connected, immediately stop the
generator operation. Check if the
generator has any fault and if the
frequency setting meets the
requirements. If the generator is in good
condition, the frequency setting is within
the requirements, but the malfunction still
persists after restarting the generator,
please contact your dealer or after-sales
service center.
23
Generator high
frequency/
F27:Generator high
frequency
1. Generator is not
connected.
2. The generator is
faulty.
3. The generator
frequency setting
exceeds the
requirements of
the specification.
In case the generator is not connected,
ignore this fault. If a generator is
connected, immediately stop the
generator operation. Check if the
generator has any fault and if the
frequency setting meets the
requirements. If the generator is in good
condition, the frequency setting is within
the requirements, but the malfunction still
persists after restarting the generator,
please contact your dealer or after-sales
service center.
24
Parallel IO check fail/
Communication of
1. Check whether the parallel