Goodwe GW10K-ES-C10 - Page 192

192
troubleshoot the fault based on the SOC indicator light display status.
NO.
SOC indicator
Fault
Solutions
1
Abnormal
voltage
Power off for 2 hours and restart it. If the
problem persists, please contact the
after-sales service center
2
Abnormal
current
Restart the battery. If the problem
persists, please contact the after-sales
service center
3
Abnormal
temperature
Power off and wait for the temperature
to recover. If the problem persists, please
contact the after-sales service center
4
Imbalance fault
Power off for 2 hours and restart it. If the
problem persists, please contact the
after-sales service center
5
Pre-charge
Failure
Restart the battery. If the problem
persists, please contact the after-sales
service center
6
Harness
Abnormal
Restart the battery. If the problem
persists, please contact the after-sales
service center
7
Component
temperature
fault
Power off for 2 hours and restart it. If the
problem persists, please contact the
after-sales service center
8
MOS open
circuit fault
Power off for 2 hours and restart it. If the
problem persists, please contact the
after-sales service center
9
MOS adhesion
fault
Restart the battery. If the problem
persists, please contact the after-sales
service center
10
Parallelized
Connection
Fault
Please check if the battery model
matches. If not, please contact the after-
sales service center