Goodwe GW10K-ES-C10 - Page 86

86
after wiring is completed.
 Do not turn on the function in the SolarGo App if the inverter is not connected to a
remote shutdown device, otherwise the inverter will be unable to operate on-grid.
 In a parallel system, please connect the communication cable to the master inverter to
achieve the remote shutdown function, otherwise, the function will not work.
Communication Descriptions
Number
Function
Description
1
CT
Connecting the CT communication cable.
2
PAR1/PAR2
The communication port for parallel operation of
inverters.
3
BMS(CAN)
For communication between the inverter and the
battery.
4
Lead-acid battery
temperature
measurement port.
For connecting lead-acid battery temperature
measurement cable.
5
Remote shutdown/NS
Protection
Provides signal control port to control equipment
remote shutdown or realize NS protection function.
5
GEN port
Used to control the generator. It can only be used in
a single inverter scenario.
Connecting the communication cable