Goodwe GW10K-ES-C10 - Page 91

91
or off-grid mode.
BACK-UP output overload.
System fault.
The inverter is powered off.
The grid is abnormal, and the power supply to the
BACK-UP port of the inverter is normal.
The grid is normal, and the power supply to the
BACK-UP port of the inverter is normal.
The BACK-UP port has no power supply.
The monitoring module of the inverter is resetting.
The inverter fails to connect with the
communication Termination.
Communication fault between the communication
Termination and Server.
The monitoring of the inverter operates well.
The monitoring module of the inverter has not
been started yet.
Indicator
Description
75%＜SOC≤100%
50%＜SOC≤75%
25%＜SOC≤50%
0%＜SOC≤25%