Grandstream Networks DP730 Administration Guide

P a g e | 102
DP752/DP730/DP722 Administration Guide
Version 1.0.11.4
• Long press on page/subscribe button of DP752 for 7 seconds
• Access DP752 Web GUI and press subscribe button .
6. The DP760 DECT Repeater will automatically pair to DP752. If the association is correctly associated,
all the LEDs will remain solid on and the repeater status will be updated as following.
Figure 42: Repeater Status – Associated (Manual Association)
Note: Make sure that Repeater Mode is enabled on your DP752 Base Station.
Use DP752 Repeater Management to Associate DP760
❖ Enabling Repeater Management Mode
The following steps illustrate how to enable and use the Repeater Management mode on DP752:
1. Access the Web GUI of your DP752 using the admin’s username and password.
2. Navigate to DECT → General Settings and set Enable Repeater Management to Yes.
3. Press Save and Apply, then reboot the unit to apply the new settings.

Grandstream Networks DP730 Specifications

General

Brand	Grandstream Networks
Model	DP730
Category	Cordless Telephone
Language	English