Grandstream Networks DP730 Administration Guide

P a g e | 58
DP752/DP730/DP722 Administration Guide
Version 1.0.11.4
Ring Timeout
Stops ringing when incoming call is not answered within a specific period of time.
Default is 60 seconds.
Hunting Group Ring
Timeout
Forwards incoming call to the next member of a hunt group if not answered within
a specific period of time. Default is 20 seconds.
Send Anonymous
Sets “From”, “Privacy” and “P_Asserted_Identity” headers in outgoing INVITE
message to “anonymous”, blocking caller ID. Default is No.
Anonymous Call
Rejection
Rejects incoming calls with anonymous caller ID with “486 Busy here” message.
Default is No.
Special Feature
Selects Soft switch vendors’ special mode. Example of vendors: Broadsoft,
CBCOM, RNK, Huawei, ZTE IME, Phone Power, Metaswitch. Default is Standard.
Music On Hold URI
Configure the music on hold URI to call when a call is on hold if server support it.
Allow Unsolicited
REFER
Allow unsolicited REFER to accomplish an outgoing call.
DECT Page Definitions
Table 17: DECT Page Definitions
General Settings
Base Station Name
Displays the name of the base station.
Default is DP752_[last 6 digits of MAC address].
Admin PIN Code
Configures admin PIN code for authentication. Default is 0000.
Enable Repeater
Mode
Enables the base station repeater mode to associate with available repeaters. Once
enabled the base station starts searching for nearby repeaters and open
subscription to associate with the available repeaters. This option requires
rebooting the base station to take effect. Default is No.
Enable Repeater
Management
Enables base station network management of discovered and paired repeaters.
Once enabled, users need first to reboot the base station to take effect, then login
on the web UI and browser to Status page, a new tab “DECT Repeater Status” will
be available to display discovered and paired devices and also allowing users to
associate / dissociate repeaters and also access their web GUI.
Default is No.
DECT PTT Silence
Timer
This will determine for how long the PTT call will be closed after being in idle state.
If set to 0, the timer will be disabled, and the PTT will be remaining forever until all
party exit the PTT call.

Grandstream Networks DP730 Specifications

General

Brand	Grandstream Networks
Model	DP730
Category	Cordless Telephone
Language	English