Figure 49: New P values format
When the DP752 boots up or reboots, it will send a request to download a file named "cfgxxxxxxxxxxxx”
followed by a configuration XML file named "cfgxxxxxxxxxxxx.xml", where "xxxxxxxxxxxx" is the MAC
address of the phone, i.e., "cfg000b820102ab" and "cfg000b820102ab.xml". If the download of
"cfgxxxxxxxxxxxx.xml" file is not successful, the provision program will download a generic cfg.xml file. The
configuration file name should be in lower case letters.
For more details on XML provisioning, please refer to:
http://www.grandstream.com/sites/default/files/Resources/gs_provisioning_guide.pdf
Handsets Provisioning
To configure the Handsets provisioning, please browse the base station Web GUI at Maintenance →
Provisioning. This is the same page used for base station provisioning. Handsets shares the settings of
base station provisioning in the field in the red rectangle, and has its own settings in the blue rectangle.
After enabled Handsets Config Upgrade, need reboot the DP752 to take effect.
To Next Page
Loading...
